Separate configuration of the 6 CAN channels.Users can configure the recording with a text file without any programming knowledge. The storage media can be accessed via a USB connection. The messages of all six CAN channels can be stored on the internal eMMC memory or on an inserted SD card. On delivery, the PCAN-Router Pro FD is equipped with a firmware for recording CAN and CAN FD data traffic. Extended operating temperature range from -40 to 85 ☌ (-40 to 185 ☏).Ethernet interface via RJ-45 socket (only for IPEH-002222).Slot for a backup battery for defined switch-off behavior (e.g.8 - 32 V power supply, protection against overvoltage and reverse polarity.32 MByte SDRAM in addition to microcontroller RAM.Microcontroller STM32F765NIH6 (based on Arm ® Cortex ® M7).Status LEDs for CAN channels, memory cards, and power supply.Battery-buffered real-time clock (RTC), can also be used for wake-up.
Alternative pluggable transceiver modules on request.NXP TJA1043 CAN transceiver with wake-up.CAN bit rates from 40 kbit/s up to 1 Mbit/s.CAN FD bit rates for the data field (64 bytes max.) from 40 kbit/s up to 12 Mbit/s.
CAN FD support for ISO and Non-ISO standards.Comply with CAN specifications 2.0 A/B and FD.6 High-speed CAN channels (ISO 11898-2).The transfer of the firmware via CAN requires a PEAK CAN interface. On delivery, the PCAN-Router Pro FD is equipped with a firmware for the configurable recording of CAN and CAN FD data traffic. Various programming examples, such as message forwarding or recording, facilitate the implementation of own solutions. The firmware is created using the included development package with GNU compiler for C and C++ and is then transferred to the module via CAN. The behavior of the PCAN-Router Pro FD can be programmed freely for specific applications. The conversion from CAN to CAN FD or vice versa enables the integration of new CAN FD applications into existing CAN 2.0 networks. With the PCAN-Router Pro FD the data flow of test benches and production plants can be managed, monitored, and controlled. The CAN messages can be recorded on the internal memory or on an inserted memory card and later read out via the USB connection. In addition, the router is equipped with an analog input and four digital I/Os. Pluggable CAN transceiver modules allow flexible adaptation of each CAN channel to the respective requirements.
Download Pheonix USB Pro (Key)ģ- Download the Stock ROM that you want to flash on your Tablet.Ĥ- Firstly, select the key file and insert it which comes along with Phoenix USB pro.ĥ- Then, Select the image file (.img firmware) and click on start.Ħ- When any mobile is connected to the PC through USB it shows that the Device driver software was successfully installed.ħ- Uploading of the file starts of its own.Ĩ- When the Uploading completes, green light appears with term “FINISH” which is indication of successfully installation of OS on Mobile.ĩ- Close the application and Unplug the USB from the mobile.ġ0- Your tablet is running the Stock ROM which has been downloaded.With six channels, the PCAN-Router Pro FD links the data traffic of modern CAN FD and classic CAN buses. See Driver installation instructionĢ- Download and extract Phoenix USB Pro.
It is use as a substitute for Livesuit, if you are unable to do flashing with it or some error arrives during the process.įollowing CPU can be flashed using Phoenix USB pro-ġ- Download and install Android USB Driver for your Tablet and install it on PC. It is required to flash ROM, firmware etc. Phoenix USB pro is flashing tools which is required to install OS on tablet. Flashing means to install Operating system to the Tablet.